Fluke 5730A Multifunction Calibrator
15 October, 2013 | Supplied by: Fluke Australia Pty LtdFluke Calibration has introduced the 5730A Multifunction Calibrator, designed to provide the most accurate dc/low-frequency signals available in a multifunction calibrator.
JDSU CellAdvisor JD740 series RF test solution
03 October, 2013 | Supplied by: VIAVI Solutions IncThe JDSU CellAdvisor JD740 series now supports LTE-Advanced, aggregating up to five component carriers and MIMO 4X. In addition, users can remotely control the instrument via Bluetooth within a 100 m range.
Micronix 500 series spectrum analyser
02 October, 2013 | Supplied by: Vicom Australia Pty LtdAccording to the company, this handheld package offers all the benefits of real-time analysis, plus the familiarity of conventional sweep capabilities such as wide frequency span and tracking generator.
Three-phase electrical energy logger
24 September, 2013 | Supplied by: Fluke Australia Pty LtdThe Fluke 1730 three-phase electrical energy logger enables the identification and analysis of electrical energy waste.
Hameg HMS3000 [HMS3010] 3 GHz spectrum analyser
05 September, 2013 | Supplied by: Rohde & Schwarz (Australia) Pty LtdThe Hameg HMS3000 [HMS3010] 3 GHz spectrum analyser features a frequency range of 100 kHz to 3 GHz, tracking generator -20 to 0 dBm and an amplitude measurement range of -114 to +20 dBm.
Anritsu MT8220T BTS Master base station tester
02 September, 2013 | Supplied by: Anritsu Pty LtdAnritsu's LTE base station tester, the MT8220T BTS Master, is a multifunction handheld tester that features improved performance over previous models.
Aeroflex 3920B digital radio test set
02 September, 2013 | Supplied by: Cobham AvCommAeroflex's 3920B is a substantial upgrade to existing 3900-series models and is suitable for testing a wide range of radio formats and manufacturers' radios.
AWT portable PIM tester
01 September, 2013 | Supplied by: Vicom Australia Pty LtdAWT portable PIM testers from Vicom are powerful, compact, ruggedised instruments for analysing and testing network comms infrastructure.
Rohde & Schwarz USB-capable power sensors
27 August, 2013 | Supplied by: Rohde & Schwarz (Australia) Pty LtdThe Rohde & Schwarz NRP family features the NRP2 base unit, NRPV virtual power meter PC software and a wide range of USB-capable power sensors.
NI LabVIEW instrument driver FPGA extensions
20 August, 2013 | Supplied by: National Instruments Aust Pty LtdNational Instruments has announced instrument driver FPGA extensions, Xilinx 7 Series FPGAs and a PXImc adapter module to expand the LabVIEW RIO architecture.
Rohde & Schwarz introduces 'Value Instruments'
19 August, 2013 | Supplied by: Rohde & Schwarz (Australia) Pty LtdRohde & Schwarz and HAMEG Instruments are set to deliver a range of cost-effective test and measurement 'Value Instruments'.
Rohde & Schwarz ESR26 EMI test receiver
13 August, 2013 | Supplied by: Rohde & Schwarz (Australia) Pty LtdRohde & Schwarz has introduced the ESR26 high-speed EMI test receiver for standard-compliant EMC testing up to 26.5 GHz.
4G LTE coverage testing
05 August, 2013 | Supplied by: VIAVI Solutions IncJDSU recently participated in the preparation for one of the largest sporting events in North America using its JD745A Base Station Analyser.
Remembering the Avo 7
04 August, 2013 by Mike Smyth, specialist technical writerThe remarkable Avo Mark 7 moving coil multimeter remained in production from 1936 to 1986. No self-respecting engineer was without one.
More speed, more insight
02 August, 2013 by Jens Medler, Rohde & Schwarz, Test and Measurement Division, Munich, Germany | Supplied by: Rohde & Schwarz (Australia) Pty LtdFFT-based EMI test receivers used for compliance measurements can reduce scan time by several orders of magnitude and to provide more precise and reproducible measurements.
